Digital Dial Gauges
[DIGIMETRON IPD Series Counter]

IPD-CC1

IPD-CC1
  • Small size DIN (48 × 48 mm)
  • All models equip fault detection functionality. BCD output and RS-232C output models available.
  • Equips useful functions such as 7-rank sorting function and peak measuring function.
  • Designed to meet the EMC Directive and the RoHS Directive.

IPD-SC1R

IPD-SC1R IPD-SC1R

Fifteen sub-units can be connected to a base unit. Using RS232C to connect to the base unit enables the measured values from all counters to be read and a variety of commands to be output.

High-speed storage of up to 2,048 data in 1 msec.

Each counter can store up to 2,048 measured data in its internal memory. The data can be stored in 1 msec cycles. Since the data can be output through RS232C after storage, IPD-SC1R can be utilized for shape measurement.

Measured values from a number of counters are stored synchronously

Sampling commands from external systems can be synchronized between counters with hardware, and can be stored simultaneously. Alternatively, the counters can be divided into a number of groups and each group can be controlled with a different timing..

Operations can be performed freely on the measured values from several counters.

On the base unit, the measured values from multiple detectors can be calculated, displayed and output. For example, the average of the values measured by 3 counters, or the sum of the values measured by 16 counters can be obtained. By selecting the calculation method, "Max - Min" of multiple measured value can be obtained. It is also possible to set constants for calculations of detector measurement values.

Designed to meet the EMC Directive and the RoHS Directive.

IPD-FCC*/*

IPD-FCC*/*

Computes the sum or difference of two detector sets (two channels). Also equips peak measurement functionality to measure deflection and eccentricity warping.

All models equip fault detection functionality. BCD output and RS-232C output models available.

Registers and displays in each of two display areas seven different data such as measuring condition or upper and lower limit tolerance set values.

Animation explaining IPD-FCC parameter setting method