Specifications
| Model | IPD-SC1RP (Base Unit) | IPD-SC1RC (Sub-Unit) | |
|---|---|---|---|
| Power supply | DC12-24V±10% Ripple (P-P) 10% or less | ||
| Power usage | 200mA or less (when detector set connected) | ||
| Display | Polarity and 6 digits, mode, green/red backlight LCD | ||
| Resolution | 0.1/1/10μm (selectable) | ||
| Display range | -99.9999∼+99.9999mm | ||
| Quantization error | ±1digit | ||
| Response speed | 2000mm/sec. (when 0.5μm resolution detector set used) | ||
| Number of detector inputs | 1ch | ||
| Maximum sets installed | 16 sets (1 base unit + 15 sub-unit) | ||
| Reset method | Reset at any optional point by the front switch, external signal or RS command. |
||
| Preset function | 6 digits and polarity | ||
| Data hold method | Hold of display and data by external signal | ||
| Peak measurement | +P, -P, P-P, (P-P)/2 (+P: Maximum, -P: Minimum) | ||
| Measuring direction | +/- (Can be switched depending on the setting) | ||
| Error functionality | Equipped | ||
| Fault detection | -NG/OK/+NG | ||
| Measurement condition registered | Seven items (key, RS command) | ||
| Computation functionality | +/-/Χ/average | ||
| RS-232C | Equipped | Not equipped | |
| Measurement value storage | 2048 data items | ||
| Input | Reset, storage commands, data hold, peak clear | ||