|±1mm (-0.4 ∼ +1mm in the case of type A)
|4mm (3.5mm in the case of type A)
|Zero point position
|Approx. 2mm (0.5mm in the case of type A)
|Accuracy guaranteed temperature range
|Weight (main body only)
|Contact point *1
_All the measuring forces are those in a state where no rubber bellows is attached.
(Each measuring force is about 0.05 to 0.15N higher if a rubber bellows is attached.)
_Non-standard specifications (model, measuring force, etc.) are available upon request.
*1Various other contact points are available.