Measuring technology that supported the shift to mass production of watches
Rapidly advancing products with increasing performance and miniaturization Measurement with even greater accuracy is required in order to measure these products and components.We have succeeded in developing the best measuring instruments using craftsmanship built up over a history of more than 50 years.
Digital Gauges SA Series Contact Type Displacement Sensors
These are high-accuracy contact-type displacement sensors that detect the absolute position of the spindle optically and output it with high resolution.In combination with the separately-sold SA Series controllers, these products serve as a length-measuring system.We have also provided new air purge specifications in which air is supplied to the body of the detector to increase its internal pressure, preventing intrusion of foreign matter from outside, which significantly improves its environmental resistance, and enabling use in harsh environments with exposure to highly-penetrating oils, coolants and cutting fluids.
Digital Dial Gauge Displacement Sensors (DIGIMETRON)
These measuring instruments function as a length measuring system that optically detects and digitally displays the travel of a linear-motion spindle or feeler.Unlike dial indicators, there is no mechanism to convert linear displacement into an amount of rotation, which means that highly accurate measurement values can be obtained through the entire measuring range.In addition, the indicating section and detecting section are separate from each other, so they can also be used while incorporated in a machine.
Electric Micrometers (ELEMETRON)
These are electric micrometers that use a differential transformer as the sensor head.They are highly sensitive and accurate, and can be used for a wide range of measurements, such as measurements requiring low measuring force.There are plunger (DTH-P type) and lever (DTH-L type) sensor heads, which can be selected according to the application.
Signal Indicators (TRI-METRON)
These signal indicators that incorporate electrical contacts into a microindicator can separate measurement statuses into three or five levels and output corresponding signals.They are widely used in production lines for automobile engines and bearings, not to mention production lines for watches, and show their true worth in the automation of inspections/sorting.
These are full-fledged industrial measuring instruments designed to meet requirements for high-accuracy measurement, and they assure high accuracy, high sensitivity and high stability.A buffer mechanism gives them excellent durability and impact resistance too.
Stands for Measurement
Developed based on the on-site requirements in watch production, these stands are backed by a long track record of use.